Cable Connect and boot the system

For the firstly time to use the Tiny2416/2451/2451/6410/210 board, connect the cable as follow:

  1. Set the Board boot from Nand Mode(see the Boot Mode choose)
  2. Use the Cross serial cable to connect the COM0(Tiny/Mini2451) to the PC Serial Port, if you want to control the board by serial, see the ( Configure the HyperTerminal)
  3. Insert the 5V power adatper in to the Board
  4. Connect the LCD to the LCD connector by FPC cable.
  5. Power on the board, you will enter the Linux system auto by LCD.

  Tel: +86-755-29638421  |    Sales Email: |  Support Email: | Gtalk: | Copyright @2013 - CoreWind Technology Co.,Limited
customer service software technical support
Live Chat by Comm100